Fiber monitoring
SmartOTU is a standalone remote fiber test solution that can automatically detect and locate faults and monitor fiber networks under both in-service and dark fiber monitoring applications
The OTU-5000 Optical Test Unit combines optical time-domain reflectometry (OTDR) and optical-switch technology to provide continuous OTDR monitoring of multiple fibers anywhere in the network. A single OTU-5000 unit, monitoring 72 fibers of 100km and more, occupies only 1RU.
The OTU-8000 Optical Test Unit lies at the core of the VIAVI optical network monitoring system (ONMSi). Combining optical time-domain reflectometry (OTDR) and optical-switch technology, a single OTU8000 unit can test hundreds of fiber links. When a fiber fault occurs, the ONMSi reports the GPS location of the fault within minutes.
otdr
Handheld, economical OTDR solution with 1310, 1550, and in-service 1625 or 1650 nm wavelengths support.
Handheld, modular OTDR solution for multimode and single-mode testing, including CWDM & DWDM OTDR, as well as a range of FiberComplete™ modules for automated insertion loss/optical return Loss (IL/ORL), OTDR and fault finding.
Handheld, dual module OTDR solution allows for dual simultaneous OTDR testing of multimode, single-mode, CWDM & DWDM, IL / ORL, and fault location.
FIBER INSPECTION SCOPES
Economical fiber inspection probe provides reliable and objective PASS/FAIL analysis of the fiber. It easily connect to a T-BERD®-2000, 4000, 5800, and more.
The VIAVI FiberChek Probe offers built-in capabilities for image viewing, auto-focus, Pass/Fail analysis, and storing/recalling results. The FiberChek Probe completely automates inspection workflows to ensure fast and accurate performance. Operates in both a stand alone mode or connected to other devices via USB, WiFi.
The VIAVI SideWinder is an autonomous fiber inspection scope. Ultra fast MPO pass / fail analysis of 12 / 24 fibers simultaneously with with automated Pass / Fail analysis to the IEC 61300 3 35 standard. Featured with an integrated display with auto-focus and memory as well wireless operation.
Network & transport tests
Handheld, Dual Port 10 G Ethernet Network and Fiber Test Set. Multi-technology support for Ethernet, OTN, SONET/SDH, PDH, Fiber Channel up to 32G, CPRI up to 24.3G, and eCPRI. Automated RFC 2544 (Enhanced) and SAMCompleteTesting per ITU-T.1564. Modular Support for OTDR, CWDM / DWDM, IL / ORL, and fault location.
Handheld, Dual Port 100G Ethernet Network and Fiber Test Set. Interfaces for SFP / SFP+ / SFP28 and QSFP+ / QSFB28 / CFP4. Multi-technology support for Ethernet, OTN, SONET/SDH, PDH, Fiber Channel up to 32G, CPRI up to 24.3G, and eCPRI. Automated RFC 2544 (Enhanced) and SAMCompleteTesting per ITU-T.1564. Modular support for OTDR, CWDM / DWDM, IL / ORL, and fault location.
Rack Mounted Test Unit for Ethernet Testing 1G to 100G Line Rates (1G, 10G, 25G, 40G, 100G). Multi-technology support for Ethernet, Fiber Channel to 32G, CPRI, eCPRI , and more. Ultra Fast RFC 2544 and Y.1564 SAMComplete Ethernet Service Activation. Remotely Locate MAP 2100 at Dual Sites for Office to Office Data Center Test. MAP 2100 and T BERD 5800 combination enables a single technician complete remote site to office network tests.
Multi-test platforms and fiber characterization test
Compact tester for installation, maintenance, and troubleshooting optical networks. Multi-test support for:
- Optical Connector Inspection
- Fiber Characterization (FC) with OTDR, IL, ORL, PMD, and AP (Limited Automation)
- WDM and ROADM with In Band OSA and High Resolution OSA
- Ethernet 10 Mbps 10 GE (Layer 1 4)
- Fiber Channel 1/2/4/8/10 G; e Node B CPRI and OBSAI Fronthaul Interfaces
- Compatible with over 80 Modules (OTDR, CWDM, etc.) for Scalability
All in One Test Solution for Optical Network Installation and Maintenance. Multi-test support for:
- Ultra Fast, Full Fiber Characterization (FC) with OTDR, IL, ORL, CD, PMD, and AP
- Fully Automated, Bi Directional FC Testing paired with the T BERD 6000A
- Advanced WDM and ROADM with In Band OSA and In Service PMD Tests
- Ethernet 10 M 100 GE Transport Test and Layer 1 4 Tests
- Scalable Up to 12 x 10 G Ports
- CPRI; Fiber Channel 1/2/3/8/10 G; OTN; and TDM / PDH / SDH / SONET
- In Service OSNR
fiber characterization
The T-BERD 8000 and T-BERD 6000A combination can support Automated, Bi Directional, Full Fiber Characterization Tests. With only ONE test set at each fiber end, complete OTDR, IL, ORL, CD, PMD, and AP testing can be completed. Auto loading of fiber distance into CD, PMD, and AP tests. Test results report are auto created.
OPTICAL SOURCES AND POWER METERS
The OLTS-85 and OLTS-85P Optical Power Source & Power Meter integrates industry-leading fiber inspection, optical source, and optical power meter into an all-in-one rugged test set. Tests include optical power, polarity, and length for single-mode and multimode fiber.
The SmartPocket OMK-36 is a quad-wavelength optical test kit with a dual-port light source (OLS-36) and a power meter with a UPP interface (OLP-35) for single-mode and multimode power and loss measurement.
The MP-60 and MP-80 measure optical power via a USB 2.0 connection to a PC/laptop/smart device - makes digital processing of optical power measurements possible and integrates directly with the VIAVI FiberChekPRO and FiberChekMOBILE software.